Modular design is adopted in digital modulation system . in this way digital modulation system consist of vedio process module , synchronized drive module , semiconductor laser modulation and system control module 數字化調制系統采用模塊化設計方法,把系統分為四個功能模塊,即視頻信號處理、同步驅動、半導體激光調制和系統控制模塊。
Synchronized drive module produces horizontal drive signal in synchronization with horizontal synchronization signal and field drive sawtooth in synchronization with vertical synchronization signal . these signal drive scaning sytem of slltv 同步驅動模塊產生與行、場同步的行同步驅動信號和場鋸齒波驅動信號,用于驅動激光電視的掃描系統。
In order to improve the dynamic and static performances , and to increase the load ability of the system , the problem of synchronized drive of multiple motors must be taken seriously , thus , the synchronized control of multiple motors is very important 為了提高多電機傳動系統的動態和穩態性能,以及滿足一些特定系統對于多電機精確同步的要求,多電機同步控制方法的研究也變得越來越重要。
It can be used to grind straight line fiat edge , pencil edge , og edge , etc . it adopts synchronized belts two belts , two side holding and synchronized drive to transmit glass , the upper belt can be adjusted vertically according to the glass thickness , two groups of spindles are distributed symmetncally , it can grind two sides at the same time , one of the two groups of spindles is fixed while the other can move horizontally , spindles adjustment can be made in three directions vertical rise and fall , horizontal forward and backward 可用于磨削直線平邊圓邊og邊等采用同步皮帶雙帶雙側夾持同步驅動傳送玻璃。上帶可根據加工玻璃厚薄作上下調整,兩組唐頭對稱分布,平行雙邊同時磨削,兩組磨頭其中一組固定。另一組相對可作平行移動,磨頭調整有三種運動垂直升降水平進退以及翻轉。